In windows XP you can enjoy a good feature to run CD or DVD automatically when you loaded it into you CD drives on your computer. This is a defaults feature in windows XP but you can disable and enable it according to your nature of work. In user interface mode there is no option to disable or enable this feature, you must edit the registry of windows and be careful to work registry.
Click Start button then type regedit in Run option then press Enter for next.
Here locate the location to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Cdrom
Here you can disable or enable automatically running your CD. Change the value of Autorun to 0 for disable and change the value to 1 for enable. At the end restart your computer for this change.
Monday, October 27, 2008
Disable or Enable Auto run CD in Windows XP Tips
USB
USB 2.0 - Hi-Speed USB - FAQ
What is USB 2.0?
USB 2.0 is a complete overhaul to the Universal Serial Bus input/output bus protocol which allows much higher speeds than the older USB 1.1 standard did.
USB 1.1 allowed a maximum transfer rate of 12Mbits/second. That rate is now called 'USB.' Though some manufacturers label their products Full-Speed USB. Note that this seems a bit deceptive. Its easy to mistake Full-Speed for Hi-Speed.
As an aside, USB mice and keyboards need only 1.5Mbits/s to function. That performance level is also named 'USB' by the USB Promoter Group.
To sum it up, USB 2.0 specification incorporates three speeds: Hi-Speed, Full-Speed and Low-Speed. You as a consumer don't need to figure out all the jargons. Just keep in mind that only 'Hi-Speed USB' and 'USB' host and devices exist.
How do I know if my PC has USB 2.0?
You can identify whether your PC has Hi-Speed or not relatively easy. Open Device Manager and expand the Universal Serial Bus section. There should be an "Enhanced" USB host controller present.
Windows 98 systems may use a different name, because Hi-Speed USB drivers in these operating systems are not provided directly from Microsoft (Windows ME, 2000 and XP get their drivers through Windows Update).
These drivers are provided by the manufacturer, and may carry the maker's name (i.e. ADS, Belkin, IOGear, Siig, etc.). There should also be two standard version USB host controllers present as well. They are embedded in the USB chip which routes the differing USB speeds accordingly without user intervention.
There are currently 6 manufacturers of the Hi-Speed USB host silicon themselves:
- ALi (Acer Labs)
- Intel
- NEC
- SiS
- VIA
- nVidia (shows as "Standard" controller
Any other brand name that appears in Device Manager would likely be an add-in Hi-Speed USB PCI card. The makers above do not make add-in cards, but they do make the chips that are used in them.
How do troubleshoot "unknown device" error listed in Device Manager?
- The USB device or the USB adapter requires its own power source. If your USB device or adapter came with an AC power "brick", try connecting it.
- Here's a likely one - the front USB ports on your PC case may be misconnected. I've seen them that way from the factory. It's a good idea to check the connections against specifications. The standard order of connection is Red, White, Green, and Black. No more than 4 wires per USB bank are needed.
- Defective device. Do not assume that all PC components work correctly out of the box. I've seen many new USB devices that do not work. If you can, try the device on another PC.
- All drivers are not installed. Some devices will require installing the driver package before plugging in the device. Some devices will also require basic USB files from the Windows CD before the unit will function. The general rule is to always follow installation directions precisely and to have the Windows CD ready.
How fast is USB 2.0?
USB 2.0 has a raw data rate at 480Mbps, and it is rated 40 times faster than its predecessor interface, USB 1.1, which tops at 12Mbps. Originally, USB 2.0 was intended to go only as fast as 240Mbps.
How will consumers benefit from USB 2.0?
With speed 40 times more than that of USB 1.1, USB 2.0 broaden the range of external peripherals that can be used on a computer. Even with multiple high-speed peripherals connected to a USB 2.0 bus, the system will less likely to hit the bandwidth bottleneck. The new specification also inherits the current USB's Plug and Play and hot-swapping capability as well as providing backward compatibility for USB 1.1 hardware, allowing existing user base to upgrade seamlessly.
Do USB 2.0 & USB 1.1 hardware work interchangeably?
You may have heard that USB 2.0 is "backward-compatible" with USB 1.0/1.1 (Full-Speed USB). While that's true, USB 1.1 is also forward-compatible with USB 2.0. Whenever a system has USB 2.0 ports, you'll find the "Enhanced" USB controller in Device Manager, but you will also find two other USB controllers. These two to maintain backward compatibility to USB 1.1 devices. Each USB 2.0 host actually has 3 chips onboard. The USB controller routes signals to the correct controller chip depending on how a device is recognized. Where a device is physically plugged in has no bearing on how it is routed. All ports on a USB 2.0 motherboard can host any USB devices at all as long as the system and devices are healthy.
The vast majority of USB 2.0 devices will work on older PCs and Macs. None should flat-out fail unless there are other issues with the system. Hi-Speed USB devices will revert to Full-Speed operation when connected this way. Understand that Hi-Speed is at least ten times faster than Full-Speed in actual operation, so the speed difference is quite noticeable - unless you have never experienced Hi-Speed, of course.
When it comes to USB hub compatibility between USB 2.0 and USB 1.1, here some facts:
- A powered hub is always preferable to unpowered.
- USB hub ports are not as capable or flexible as real PC ports so it's best not to expect the world of them.
- USB 1.1 (obsolete) hubs will work fine on USB 2.0 ports, but they cannot utilize USB 2.0 capabilities. They will default to slower speeds.
- Hi-Speed and Full/Low-Speed USB devices can coexist nicely on USB 2.0 hubs. Connecting such a hub to a USB 2.0 port is recommended.
- USB 2.0 hubs can be used on older USB 1.1 computers.
- Although it is said that you can "cascade" up to 4 hubs, problems may start to arise after two hubs, it's best to minimize hub usage if possible.
- Many USB devices don't work well on hubs. Cameras, scanners and especially USB drives are known to have problems with hub connectivity.
- Remember that "active USB extensions" are really just one-port hubs.
Will USB 2.0 replace USB 1.1?
Not entirely, because many products such as generic keyboards, mice, joysticks and audio speakers do not require the faster speed of the new USB 2.0 technologies. Only bandwidth-hungry devices, such as web cams and high-capacity storage systems, will need all the speed. However, next-generation systems will come with USB 2 ports rather than USB 1.1.
How do I distinguish between a USB 2.0 and a USB 1.1 devices? New logos designed by the USB Promoter Group allow consumers to easily identify the new USB 2.0 products. The new colorful logo for USB 2.0 is labeled USB Hi-Speed, and the new logo for USB 1.1 is labeled with USB Basic Speed. However, most people won't miss it as manufacturers often label USB 2.0 READY Or 40 times faster than USB 1.1, on the boxes.
Will USB 1.1 devices run any faster on a USB 2.0 bus?
No. However, the new USB 2.0 archiclecture allows more high-speed USB 1.1 devices, such as web cams, audio devices, to share the bandwidth. Developers need to follow USB 2.0 spec in order to design higher speed peripherals that can take advantage of the extra bandwidth. USB 1.1 devices still operate at 12Mbps at full-speed and 1.5Mbps at low-speed on a USB 2.0 bus. Even though USB 1.1 devices won't run any faster, they can work alongside of USB 2.0 devices on the same bus.
What are USB Hi-Speed and USB Basic Speed logos?
These logos are part of USB Promoter Group's branding program that ensures the quality of USB products. The USB 2.0 certified products would display a blue, white and red logo, bearing the words Certified and Hi-Speed. The classic USB 1.1 certified products would display a black and white logo with the words USB and Certified.
Under a license from USB-IF, products must pass the compliance tests before manufacturers can use one of the two trademarked logos. The Promoter Group will take legal actions on manufacturers that label either logo on their products, which have not passed the tests.
What happen if a USB 2.0 devices are plugged into a USB 1.1 systems?
The entire bus under the USB 1.1 root hub will slow to 12Mbps. The operating system will probably notify the user about the sub-optimal configuration and recommend for a better course of action.
If several USB 1.1 hubs are connected to a USB 2.0 bus, then each of the USB 1.1 hubs will get a full 12Mbps bandwidth.
What is the max? Length of a USB 2.0 cable?
5m. however, if you cascade 5 hubs with 5m USB cables, this will allow you to connect a device 30m away.
What do I need to use a USB 2.0 device?
The requirement is similar to that of USB 1.1, but all components will have to be USB 2.0 compliant. A successful USB 2.0 connection requires a USB 2.0 host controller card, a USB 2.0 driver and a USB 2.0 peripheral.
How much will it cost to upgrade to USB 2.0?
Around $80 to $150. Currently, Orange Micro., Adaptec and IO Gear are shipping USB 2.0 PCI cards, some of which even have FireWire ports. Interestingly, almost all USB 2.0 PCI cards include an internal port, which is probably for connecting internal USB 2.0 IDE enclosure or USB 2.0 front panel.
Will USB 2.0 arrive on mobile computers?
Yes, but not in integrated solution on laptops. You will need a USB 2.0 Card Bus card. Orange Micro. is shipping USB 2.0 compliant 4-port Card Bus card. Eventually, notebook vendors will adapt to USB 2.0 technology, and we will see USB 2.0 ports on laptops. This transition won't happen until 2002 at the earliest.
Which operating systems support USB 2.0?
Microsoft has released the official USB 2.0 driver for Windows XP and Windows 2000. The version is 5.1.2600. The software is available on-line at Windows Update website. (If you don't have a USB 2.0 card installed in your system, Windows Update won't list the USB 2.0 driver as an update.)
The software company is still considering USB 2.0 support for Windows ME, but it already has decided not to bring USB 2.0 to Windows 98 and Windows 98 SE. If you have Windows 98, you will have to rely on 3rd party USB 2.0 support from USB card manufacturer.
Do USB 1.1 cables work with USB 2.0 devices?
Ideally, yes. USB 2.0 architecture uses the same cables and connectors as USB 1.1 compliant products. Unfortunately, only 3 out of 11 cables on the market are certified as USB 1.1 compliant. You may run into the cables that cause problems connecting high-speed peripherals. To avoid negative user experience, most vendors include USB 2.0 compliant cables with their USB 2 PCI cards and peripherals.
Speed up the Start Menu Tips
If you are still working with old or slow computer but don't worry, you can give surprise to your friends with some changing in windows registry. Edit your computer registry keys to speed up your computer start menu, because the default speed of start menu is slow. After these changes your computer start menu will response like latest computer.
Follow the given steps to change the speed of Start Menu.
- First click on Start button then type Regedit in Run option.
- In Registry Editor panel go to the path:
HKEY_CURRENT_USER \ Control Panel \ Desktop \ MenuShowDelay
- By default the value "MenuShowDelay=400", but you can set value between 0 to 400. Now put the value "MenuShowDelay"=0 to speed up.
- Now close the registry editor and restart your computer after any changes to go into effect.
Disable drives in My Computer from unknown user Tips
If you want to prevent any users to access your computer or network shared drives using My Computer then you can hide the all drives for example C:/, D:/ and save your data from any unknown user. But next time you can turn on the display of these drives using registry editor. Now edit the computer registry to turn off the display of drives, but be careful to work with computer registry.
Follow the given steps to hide computer drives:
- First click on Start button then type Regedit in Run option.
- Here locate the location to:
HKey_Current_User \ Software \ Microsoft \ Windows
\ Current Version \ Policies \ Explorer
- Here right click on right side of Registry editor panel and add new DWORD then put its value 3FFFFFF.
- Now close the registry editor and restart your computer after any changes to go into effect.
Change The Recycle Bin's Name Tips
You can change the name of Recycle Bin of your system if you wish. It is very easy and interesting but it require some changes in windows registry,
- First click on Start button > click on Run option.
- Type here regedit.exe and press enter then you will find there regedit editor.
- In regedit editor you will open HKEY_CLASSES_ROOT folder, In this folder open the CLSID folder then open the {645FF040-5081-101B-9F08-00AA002F954E} folder >ShellFolder folder at last.
- Here simply change the data value from "40 01 00 20" to "70 01 00 20".
After performing all above steps restart your computer then you will find option to rename Recycle name after right clicking on Recycle Bin Icon. Now you can change new name as you wish.
Labels: Computer, Registry, Tips
Posted by Rifz Computer at 3:10 AM 0 comments
Browsing Your Computer via the Address Toolbar Tips
Here is a very cool tip to open your system drive and web page quickly. You can open any web page without opening browser, windows will automatically open your windows browser and open your web page. you can do this if you put an Address Bar on your Taskbar.
Right click on your system taskbar > go to Toolbars and then click no Address option, here you will see a mark on Address option. After this a Address Bar will appear on your system Taskbar, you can open any web page by typing URL name here and press Enter, Windows will automatically open your web page in be default set browser.
You can also browse files and folders on your computer by using the Address Bar. simply type drive letter like C:\ , D:\ in Address Bar and Press Enter.
C:\
WiMAX
WiMAX Wireless Broadband Info
WiMAX stands for World Interoperability for Microwave Access that enables the actual broadband wireless network with high speed. WiMAX operate same like WiFi but WiFi operate with some limitation like it is base band technology and cover only 100 feet radius with slow speed. WiMAX covers a radius of 50 Km and work with the speed of 70 Mbps. WiMAX is the replacement of the wired broadband. In wired broadband connection, we can transmit data with 512 Kbps to 10 Mbps speed and more, for example DSL broadband and cable broadband. In future all new desktop and notebook computers will be incorporated with WiMAX technology. With this technology you will be connected to the internet even you are driving your car with the speed of 120 Km.
Objective of WiMAX
- Superior Performance
- Flexibility
- Advanced IP-Based Architecture
- Attractive Economics
IEEE 802.16 Specifications
- Range 30 mile radius from the base station for LOS (line-of-sight).
- Range 4-6 miles radius from the base station for NLOS (Non-line-of-sight)
- Maximum data speed supported as 70 Mbps.
- Licensed frequency band: 2- 11 GHz
- Un-licensed frequency band: 10- 66 GHz
- Line of sight is not needed between user and the base station unless very high date rates are required at the user premises.
Labels: Computer, Internet, speed, Technology, Wifi, Wireless
Posted by Rifz Computer at 2:47 AM 0 comments
Friday, October 24, 2008
Download the youtube videos on harddisk Tips
Using this tip, you can easily download the youtube.com movies and save on your computer hard disk. Actually all videos are saved on youtube in flash video format, so you can simply play these videos on the website and can't save directly to your computer. But there are many tools are available in the market to download these videos on the hard disk, but here you can do this using a website. You can convert also the downloaded videos from youtube into any common video format, for example, windows media video file (wmv), windows video file (avi) and movie file (mpeg).
Follow the given steps to download videos from youtube on your computer:
- First open www.youtube.com then plays any your favorite video.
- For example, you search a video and the URL of that youtube video is http://www.youtube.com/watch?v=pVkUG6XLItc The ID if this search is pVkUG6XLItc after equal sign.
- Now open a website http://youtube.navi-gate.org, now copy and paste above video ID in the search box, and press button ID search.
- The result may be displayed in any different language, but don't worry, just click on download button and save this video on your computer hard disk. Now use any video converter to convert it in any other common format.
XP SysKey Trick
If you have Windows XP then I really think you're going to like this week's security tip. Are you in a situation where you really don't want anybody accessing the family PC while you're not around? Maybe you don't want anybody to use your computer at all. Maybe you just want a little tighter control over when and by whom your PC gets used. If any of these situations sounds like yours then read on.
This week's security tip is on the syskey command. The syskey is a command line tool to help you enable your Startup Key. Without getting too techy on you, the Startup key is a complex algorithm that if configured can stop anyone from logging on to your system who doesn't poses the key. No startup screen or user accounts will be available until you present the key, you're basically looking at a black screen with one small lonely window asking for the Startup Key to gain access. The Startup Key, which is a floppy disk with the appropriate key code, simply needs to be inserted into the floppy drive, and activated. This will satisfy the security request and allow you to proceed to the login screen. If you don't have a floppy drive then I'm afraid you might as well stop reading now.
The Startup Key is created when you enable the Startup Key process as described later in this article. One thing you must keep in mind, and is of the utmost importance, you should make at least one copy of this floppy, test it to insure that it works, and put it in a safe place. If you lose this Key you will not be able to log into you Operating System. You may even want to make a third copy to keep off-site. If you do lose your Startup key then your only option is to use a Restore Disk (If you have one) to restore your registry to a state it was prior to the enabling of Startup Key.
OK, if this sounds like a security measure you would like to put into action then follow the directions below. Again, please make at least one copy of this disk so you don't lock yourself out of your system and send me a bunch of hate e-mail. Well, with that said twice I guess it's show time. The directions below will help you get things set up, and below that I have attached a link out to Microsoft's information on this so you can look it over.
CONFIGURING STARTUP KEY:
- Go to Start/Run and in the blank field type "syskey" press enter, or OK.
- You should see a small window titled "Securing the Windows XP Account Database". From this Window select the "Update" button to move to the next window.
- The "Startup Key" is the next window. You'll see a couple of options there, but the one we are looking for says "Startup Key on floppy disk", along with some warning about how your system is going to startup now.
- After selecting this click OK, and a pop-up will alert you that the key has been changed. Another message follows asking you to insert a disk in drive A: (Floppy drive).
- Insert the floppy, click OK, and one more window will come up telling you that the Key has been changed and you need to have this floppy disk in order to log into Windows. That's exactly what we want.
When you're all done go ahead and eject the floppy (you might want to slide the little lock up on the floppy to insure you don't format it on accident), and restart the PC. Windows will appear to come up normally, but after it loads the kernel the "Windows XP Startup Key Disk" window pops-up. Grab your Startup Key floppy put it in the floppy drive, and select OK. You'll see Windows load up and bring you to your user logon screen.
I told you this is a cool trick and really helps lock down you PC. I hope you get some use out of this, but please be careful.
Labels: Computer, Information, Microsoft's, Security, Trick, Windows XP
Posted by Rifz Computer at 5:05 AM 0 comments
Secure your password from hackers attacks Tips
Today tip will help you to secure your computer from the access of professional hackers. There are some hacker’s breaks into your computer without using any impressive programming skills but trying to find words to guess as your password. Normally people use their name, house number, mobile number and word “password” as a password. If you have very simple password then a hacker can hack your computer very easily. To safe your computer from hackers there is a best way to create a tricky password. Here I will tell you some different type of tricks to make your password that can’t guess easily by any body.
- Use the maximum characters in your password.
Always set the password using maximum characters length, because it is simple method, if your password is longer then it is very difficult to guess.
- Use the combination of lower-case and upper case letters in your password.
Normally computer users use the lower case in password selection but it is best practice to use the combination of both (lower-case and upper case). So using different cases in your password makes it much more difficult to crack.
- Use the combination of letters and numbers in your password.
When you mix both letters and numbers just like one letter and one number then your password is more incomprehensible.
- Avoid using the name of your family members as password.
Always try to avoid the name of your child, spouse, city and country name as password, because if any body knows about your personal life’s details then they try to use these detail to guess your password.
- Use any tools to create random password.
Mouse Cleaning Tips
The mouse is the most commonly used pointing device in windows environment on the personal computers. That is why mouse required extra care as compare to the other parts of the computer. You should clean your mouse when you feel the mouse is slow to move in different directions or making some strange movements.
- First disconnect your mouse from the back side of the computer.
- Now read the mouse manufacturer manual about your mouse model on how to safe and clean it.
- Open the ball cover from the back side of the mouse and wash the ball then dry it with cloth.
- Now clean dust in the inner side of the mouse specially removes the dust on the rollers with lightly dampened cotton bud. You can use the compressed air for this purpose.
- At the end dry it and Re-assemble your mouse then connect with computer.
Posted by Rifz Computer at 4:39 AM 0 comments
Motherboard Cleaning Tips
Motherboard is the main part of your computer that contains all hardware components. Your computer motherboard could fry, if you do not keep it clean on periodically basis. Dust is the main cause to heat up your system and heat link to hardware failure. You can save your computer maintenance cost if you clean your computer on the regular basis. This will improve the cooling and performance of the motherboard components.
- To clean your motherboard first unplugs your system power from the electrical outlet.
- Using the screwdriver remove the side covers of your computer case and put them to one side.
- Check all data and power cables connections. Inspect all motherboard PCI and AGP slots.
- Remove all add-on card of your motherboard for example RAM, modem, VGA, sound card and LAN card.
- Now blow the air around all the motherboard sides and keeping away your blower nozzle 4 to 5 inches away from main board components. You can use vacuum cleaner also for this purpose but compressed air is the better solution to clean a system.
- At the end assemble back all cards, cables and side covers of your system.
- I recommend you doing this after every three months if you want to save your system life.
Labels: Computer, Hardware, Maintenance, Motherboard, RAM, system, Tips, VGA
Posted by Rifz Computer at 4:26 AM 0 comments
Automatic Screen Refresh Tips
When you are working on your local computer and want to refresh any changes in your system automatically. For example some times you are watching sports results, online Stock Exchange rates and any changes to your hard drive but these changes are not usually refreshed until you press the F5 key on your keyboard.
To refresh your screen automatically you should edit your system Registry. But the best technique to edit the windows registry keys, always export or backup the whole windows registry keys on backup drive before editing. Because any mistake in Registry can cause serious problem in your computer to run properly.
Follow the given steps to change the updates automatically.
- First click on Start button then type Regedit in Run option.
- In Registry Editor panel go to the path:
- HKEY_LOCAL_MACHINE / System / CurrentControlSet /Control / UpdateMode
- Here in right hand side panel edit the DWORD value to be between 1 and 5.
- Now restart your computer after any changes to go into effect.
Graphic Card Tips
The graphic card is one of the most important pieces of hardware in your PC. Without it, your super monitor with all the bells and whistles is just a junk box.
Make Directional Input
Most video cards come with simple frame capture programs, but you'll have to do some programming if you plan to integrate video capture with other operations on your computer, such as adding text data as an overlay or changing video-in channels on the fly. In this case you'll need good programming libraries in a language with which you are familiar for the video card. Some companies include libraries with their cards, but most charge extra. Most often libraries, when available, are for C or BASIC, and sometimes Pascal.
Choose Between 24 bit and 32 bit
For True Color mode, some graphic cards offer 24 bit while some offer 32 bit. Which is the best? When True Color mode was first suggested, it utilizes 32 bit which was very pleasing to the eye, they realize that 24 (with less coolers) won't look much different since the human eye can only take about a certain amount of colors. On the other hand, 24 bit will run faster compared to 32 bit because it uses less colors. So if your card utilizes 24 bit, don't worry, it isn't bad.
Always Use The Latest Drivers
Yes, it is important to make sure you always have the latest drivers. The latest drivers will offer you better performance, more utilities and more compatibility (usually for Direct X or Direct3D). Take the effort to check you card manufacturer's site to look for the latest driver updates.
Clean computer Casing Tips
When you noticed your computer case is looking yellowish then you can understand about inner side of your computer case as dirty as outside. Because Dust is the main cause to heat up your system and heat link to hardware failure. You can save your computer maintenance cost if you clean your computer on the regular basis.
- Never place your computer on the ground, always use computer table or shelf for this purpose.
- To clean computer case first unplugs your system power from the electrical outlet. Remove all cables and connectors from the back side of your computer.
- Now use the compressed air and start clean from back to front of your computer case, specially casing and power supply fan.
- At the end using lightly dampened cloth or spray any cleaning fluids on the computer case and use paper towel to dry it.
- This process should be done after every three months if you want to save your system life.
Labels: Computer, Maintenance, system, Tips
Posted by Rifz Computer at 12:28 AM 0 comments
General Cleaning Tips
You can save your computer maintenance cost if you clean your computer on the regular basis. This will improve the cooling and performance of the computer components. Your computer components could damage, if you do not keep it clean on periodically basis, because dust is the main cause to heat up your system and heat link to hardware failure.
- Never place your computer on the ground, always use computer table or shelf for this purpose.
- To clean computer case first unplugs your system power from the electrical outlet. Remove all cables and connectors from the back side of your computer.
- Now blow the air around all the hardware components and keeping away your blower nozzle 4 to 5 inches away from main board components. You can use vacuum cleaner also for this purpose but compressed air is the better solution to clean a system.
- At the end using lightly dampened cloth or spray any cleaning fluids on the computer case and use paper towel to dry it.
- Never clean inside computer components or other circuit board with damp or wet cloth.
- Always be careful to eat or drink around the computer.
Labels: Computer, Hardware, Maintenance, system, Tips
Posted by Rifz Computer at 12:22 AM 0 comments
SCSI Disk
- Disk SCSI (Small Computer System Interface) IDE with similar organizations in addressing.
- Differences in the tool interface capable of transferring data in high speed.
- High-speed transit, is a standard for computers.
- UNIX from Sun Micro systems, HP, SGI, Machintos, Intel, especially computer-server computer network, and vendor-other vendor.
- SCSI is actually more than just a tool interface hard disk.
- Each device has a unique ID as a media introduction by the SCSI.
- SCSI is a bus as capable as a checker to 7 equipment such as:
- Hard
- CD-ROM
- CD-Recorder
- Scanner music, n traveling.
SCSI Disk Version
Wednesday, October 22, 2008
Detect viruses in a computer using multiple antivirus engines Tips
Detect viruses in a computer using multiple antivirus engines
Virus detection and its removal are made through an antivirus program which finds out viruses in a computer and then possibly removes or repairs the virus problem. But today an interesting tip, how to scan your system without any installed antivirus program. You can scan any specific file for viruses, malware, worms and trojans on your system without any preloaded antivirus protection.
VirusTotal is a free service that facilitates you for quick scan to detect viruses, malware, worms and Trojans. Virus Total will analyze your system files using multiple antivirus engines. Virus Total is not a proper substitute of installed antivirus program, because this service works only when you will be connected to internet.
Now open the VirusTotal site to start scan process.
Now under the "Upload the file" section, click on browse button to select the virus affected file and press "Send File" button.
Here Virus Total will takes some time to upload file (depends upon the file size and internet speed).
Wireless Security Tips
10 Tips for Wireless Security
Category: Computer Network, Application Server
Wireless network, or often called with the wireless network is easy to set up, and also feels very comfortable, especially if we want to walk the road circumnavigator home or office with a portable computer but can still access the Internet network. However, because using the wireless wave, it will be easier to hack than in-use cable connections. There are a few tips here to secure the wireless network.
The step-step as follows:
- Use encryption. Encryption is a measure of security first, but many wireless access points (WAPs) do not use encryption as a default. Although many WAP have wired equivalent privacy (WEP) protocol, but not enabled by default. WEP indeed have some holes in the security, and an experienced hacker would be able to open it, but it is still better than no encryption at all. Make sure to set method WEP authentication with the "shared key" rather than "open system". To "open system", he is not to Encrypt data, but only Authentication client. Change the WEP key as often as possible, and use 128-bit WEP compared with the 40-bit.
- Use Strong encryption. Because of the weakness of the existing weaknesses in WEP, it is recommended to use Wi-Fi Protected Access (WPA) also. To use WPA, WAP should be downloading supporting. The client side must also be downloading a page support WPA.
- Change Default Administrator Password. Most factories use the same password for the administration of all WAP their products. The default password is generally known by the hackers, who can later use to alter the settings in your WAP. The first thing that must be done in the WAP configuration is the default password change page. Use at least 8 characters, a combination of letters and numbers, and do not use the word in the dictionary.
- Turn off SSID Broadcasting. Service Set Identifier (SSID) is the name of our wireless network. By default SSID of the WAP will be broadcast. This will create a user to easily find the network page, as the SSID will appear in the list of available networks in the wireless client. If the SSID is turned off, users must first know the SSID it can be quite connected with the network page.When the WAP.
- Matikan are not. How this one seems very simple, but some company or individual to do so. If we have users who are connected only at a certain time only, there is no reason to run a wireless network at any time and provide the opportunity for the intruder to implement the intenet. We can shut off access point when not in use.
- Change the default SSID. Factory provides a default SSID. Usefulness of off SSID broadcast is to prevent other people know the name of our network, but if you still use the default SSID, will not be difficult to guess from the network's SSID.
- Use MAC filtering. Most of the WAP (not cheap cheap, of course) will allow us to filter the media access control (MAC). This means we can create a "white list" of the computer that a computer can access the wireless network we, based on the MAC or physical address of the network card in each PC. Connections from the MAC is not in the list will be rejected. This method is not necessarily safe, because it is still possible for a hacker to do packet sniffing which transmits it via the wireless network and get the MAC address is valid from one user, and then use it to make a spoof. But the MAC filtering will make an intruder difficulties that still has not been master's champion.
- Isolate Wireless Network from LAN. To protect their internal network cable from the threats that come from the wireless network, should probably be made wireless DMZ or perimeter network that isolate from the LAN. That means installing a firewall between the network and wireless LAN. And to wireless client that requires access to the internal network, he must first perform Authentication with RAS server or use a VPN. This provides extra layer for protection.
- Control Signal Wireless. 802.11b WAP radiating waves up to about about 300 feet. But this distance can be added by changing the antenna with the better. With the high gain antenna, we can get more distance. Directional antenna will emit signals to a certain direction, and the jet not a circle, as happened in the omnidirectional antenna is usually found in the package WAP standard. In addition, by selecting the appropriate antenna, we can control the distance signals and directions to protect themselves from the intruder. In addition, some of the WAP settings that can signal strength and direction through the WAP con fig page.
- Emit wave in the frequency Different. One way to shrink from hackers who are using technology 802.11b / g, which is more popular with 802.11a. Because 802.11a working on a different frequency (the frequency at 5 GHz), the NIC in the design to work on the popular technology that will not be able to catch the signal page.
Labels: Cheap, Computer, Hackers, Internet, Protection, Security, Technology, Tips, Wireless
Posted by Rifz Computer at 10:11 PM 0 comments
CPU (Central Processing Unit)
CPU
- Central Processing Unit.
- It is the most important components of the computer system.
- Components of data processing based on the instructions given to him.
- In creating the functions and tasks, the CPU composed of several components.
Main components of the CPU
- Arithmetic and Logic Unit (pestle)
- Control Unit
- Registers
- CPU Interconnections
CPU Chart
Arithmetic and Logic Unit (pestle)
- The task of shaping functions - data processing functions of the computer.
- Pestle is often called the machine language because the instructions do this - the machine language instructions given to them.
- Pestle consists of two parts, namely the unit and the unit arithmetic Boolean logic, that each - each have the task specification work.
Control Unit
- Duty to control the operation of the CPU and the overall control the computer so that the synchronization of work between the components in the run function - a function of operations.
- Included in the responsibilities of the unit is to take control instructions - instructions from main memory and determine the type of instruction.
Registers
- Media storage internal CPU that is used when processing data.
- Memory is temporary, usually in use to store data when the data is processed or for further processing.
CPU Interconnections
- System connection and a bus connecting the internal components and a bus - the bus external CPU.
- CPU internal components, namely pestle, the control unit and the register - the register.
- Component external CPU: other system, such as main memory, a tool inputs / outputs.
CPU internal components
Detail the structure of the internal CPU
Labels: Computer, memory, Operations, Register, Registers, Storage, system
Posted by Rifz Computer at 8:53 PM 0 comments