Showing posts with label Capacity. Show all posts
Showing posts with label Capacity. Show all posts

Friday, October 24, 2008

RAID

RAID level 0

  1. Actually not use RAID redundancy does not improve in performance.
  2. Data distributed on the entire disk array, is the advantage of using a large capacity disk.
  3. RAID - 0 become a model of the data strip on the disk with a data management system specific to the data stored on considered a logical disk.
  4. Mechanism for the transfer of data in one sector at a time so that only good for handling large data transfers.

RAID level 1
  1. Redundancy obtained by duplicate all the data on the disk mirror.
  2. As with RAID - 0, RAID - 1 stripping also use the technology.
  3. The difference is in level 1 each strip mapped to the logic of the two disks that are logically separate so that each disk arrays will have a mirror disk that contains the same data.
  4. RAID - 1 expensive.
  5. RAID - 1 increase in performance approximately doubled compared to RAID - 0 in the operation read, but not to write operations significantly increased.
  6. Matches are used to handle data that is often experienced failure in the process of reading.
  7. RAID - 1 still working on sector-sector.
  8. Benefits of RAID - 1:
  • Request reading can be served by one of the disk because there are two disks contain the same data, depending on access to the fastest time.
  • Demand for storage or writing is done on 2 disks in pararel.
  • There are beack-up data, namely the disk in the mirror.

RAID level 2
  1. RAID - 2 using the technique pararel access to all the disk. - All participating disk and executing every request so that there are mechanisms for synchronization and disk rotation head.
  2. Technology used in the stripping this level, only strip small size, often in word or byte size.
  3. Use a system error correction bits parity with the Hamming code.

RAID level 3

  1. Organized similar with RAID - 2.
  2. The difference in RAID - 3 requires only a single disk redudant, does not depend on the number of arrays disk.
  3. Computing parity bit for each word and write data on disk pritas special.
  4. When the drive failure occurs, the data re-arranged the rest of the data is still good and from information paritasnya.
  5. Using pararel access to the data distributed in the form of small strip-strip.
  6. Performing high-yield transfer, but can only executing a request.
  7. I / O, so only if used in high data transaction environment decline in performance.

RAID level 4

  1. Using techniques that independent access to every request so that disknya read or write served in pararel.
  2. RAID is suitable to deal with the culture system data transfer rates.
  3. No need synchronization because each disk operate independently.
  4. Stripping the data in a large size.
  5. Strip parity bits-per-bit is calculated to strip all the related data on each disk.
  6. Parity stored on disk for parity.
  7. When the writing operation, array management software not only to update the data but also related to parity.
  8. Benefits of parity with the disk that has made special security data more secure, but with a separate disk parity will slow performance.

RAID level 5

  1. Having a similarity with RAID - 4 in the organization.
  2. The difference is strip-strip parity distributed across the entire disk.
  3. For security reasons, the strip parity disk is stored on a disk other.
  4. RAID - 5 improvement from the RAID - 4 in terms of improving performance.
  5. Disk is usually used in the network server.

RAID level 6

  1. It is the latest RAID technology.
  2. Using the method of calculating parity for two reasons to anticipate the accuracy and error correction.
  3. As with RAID - 5, parity stored on the disk other.
  4. Have a high transfer speeds.
RAID Images

Thursday, October 23, 2008

Magnetic Disk

Magnetic Disk

  • Disk is a circular disc made of certain materials (metal or plastic) surface coated with a material that can be magnetic.
  • Mechanisms read / write head using read or write head is called a spindle conduction oil.
  • Design physical, head are stationer disc while the disk rotates in accordance control.
  • Two methods of data on the layout of diak, the constant angular velocity and multiple zoned recording.
  • Disk organized in the form of ring-ring concentration called tracks.
  • Each track on the disk separated by a gap (gap: prevent or reduce the reading and writing errors caused melesetnya head because of interference or magnetic fields).
  • A number of bits that will occupy the same track that is available.
  • As to the disk, then the density (dens Ty) disk will be large.
  • Data sent to the memory of this in the form of a block, block generally smaller capacity of the track.
  • Block-block data stored in the disk-sized blocks, called the sector.
  • Track usually filled some sectors, generally 10 to 100 each tracknya sector.

IDE Disk (hard drive)


IDE disk (hard drive)


  • IBM PC XT develop, use a Seagate 10 MB hard disk for storing programs and data.
  • This hard drive has 4 head, 306 cylinders and 17 sectors per track, controlled by Xebec disk checker on a plug-in card.
  • Technology is developing rapidly to make the disk checker that previously separated into one integrated package.
  • Did the IDE drive technology (Integrated Drive Electronics) in the middle of 1980.
  • Technology IDE disk can only handle a maximum capacity of 528 MB of disk and control 2.
  • IDE developed into EIDE (Extended Integrated Drive Electronics).
  • Capable of handling the hard drive more than 528 MB and supports address LBA (Logical block addressing), the only method that gives the number in sectors ranging from 0 to a maximum of 224-1.
  • This method requires checker able to convert addresses into the address LBA head, sector and cylinder.
  • Improving the performance of other transfer speed is higher, able to control the 4 disk, able to control the CD-ROM drive.

Tuesday, October 21, 2008

Computer Evolution and Performance Part 11


Intel

  • 1971 - 4004
  • Microprocessor first
  • All components of the CPU is a single chip
  • 4 bits
  • Following the emergence of 8008 since 1972
  • 8 bits
  • Microprocessor with special design application
  • 1974 - 8080
  • Intel is microprocessor with the general usefulness.

Increased speed
  • Pipelining
  • On board cache
  • On board L1 & L2 cache
  • Branch PREDICTION
  • Data-flow analysis
  • Speculative execution

Comparison of performance
  • Increased processor speed.
  • Increased memory capacity.
  • Speed memory behind than processor speed.

Logic and Memory Performance Gap

Computer Evolution and Performance Part 10


DEC PDP-8

  • Introductions 1964.
  • Minicomputer first time (after the miniskirt).
  • Does not require air-conditioned room.
  • The form small, can be put on the table lab.
  • The price is $ 16,000
  • $ 100 + for the IBM 360
  • Already there are applications & OEM.
  • Bus architecture such as PDP-8 is later used by computers - the modern computer.

DEC - PDP-8 Bus Structure


Semiconductor memory
  • Start the 1970.
  • Fairchild.
  • Size of a single core
  • i.e. 1 bit of Magnetic core storage
  • Holds 256 bits
  • Non-destructive read
  • Faster than much core
  • Capacity approximately doubles each year